High Performance Turf Reinforcement Matting Installation on West Coast Florida
Chewning Consulting installs High Performance Turf Reinforcement Matting systems for slopes, channels, and stormwater conveyance areas that need permanent erosion protection with a vegetated finish. Where standard erosion control methods fail, HPTRM holds.
EST. 2004
EST. 2004
REQUEST A FREE QUOTE
Why Choose Chewning Consulting for HPTRM Installation
HPTRM performs well when it is installed correctly and fails quickly when it is not. Proper anchoring, seaming, and subgrade preparation are not optional steps. They are what determine whether the system holds under the first significant rain event or lifts and fails.
Correct Anchoring and Seaming
Every HPTRM installation requires properly spaced anchors and correctly overlapped seams to prevent the mat from lifting under flow or wind. We follow manufacturer specifications and project drawings on every installation without shortcuts.
Subgrade Preparation Done Right
A smooth, properly graded subgrade ensures full contact between the mat and the soil surface, which is critical to the system’s ability to protect the soil underneath. We prepare the subgrade before any mat goes down across all our West Coast Florida project sites.
Seeding and Vegetation Coordination
HPTRM works best when the right seed mix is applied at the right time. We coordinate seeding with installation to give the vegetation the best chance of establishing quickly and filling in the mat as designed.
Experience Across Florida's Varied Conditions
From inland drainage swales to coastal embankments, Florida’s erosion control challenges vary significantly by location. Our crews have worked across a wide range of site conditions and understand what it takes to get HPTRM performing as designed in Florida’s climate.
Reliable execution. Certified divers. Zero shortcuts underwater.
HPTRM Solutions for Permanent Erosion Control
Permanent reinforcement. Vegetated finish. Built for high-flow conditions.
Standard erosion control blankets and temporary matting are designed to last only until vegetation establishes. HPTRM is different. It is a permanent system that works with the vegetation, reinforcing root systems and protecting the soil surface even under the sustained hydraulic stress that Florida’s storm events and tidal conditions regularly produce.
Channel Lining with HPTRM
We install HPTRM in drainage channels and waterways where flow velocities exceed the limits of turf alone but a hard armoring solution is not required or permitted.
Slope and Embankment Protection
Stormwater Conveyance Systems
Levee and Berm Face Protection
Shoreline and Bank Stabilization
OPERATIONAL SCOPE
HPTRM Applications We Handle Across West Coast Florida
Municipal and County Drainage Projects
Stormwater management infrastructure across West Coast Florida relies on channel linings and swale protection that perform season after season. We install HPTRM systems for municipalities and county agencies that need compliant, low-maintenance solutions for their drainage networks.
DOT Roadside Channel and Embankment Work
Highway shoulders, roadside channels, and bridge embankments are among the most erosion-prone areas in any transportation corridor. We install HPTRM on DOT and private transportation projects where channel velocity or slope steepness exceeds the capacity of standard seeding and temporary matting.
Residential and Commercial Development Sites
Developers working through the permitting process often need to demonstrate that post-construction stormwater channels and slopes will be stabilized with a permanent system. HPTRM satisfies those requirements and looks far better than hard armoring once vegetation fills in.
Environmental and Restoration Projects
In sensitive areas where preserving a natural appearance is as important as controlling erosion, HPTRM allows vegetation to become the primary erosion control element while providing the underlying reinforcement needed to protect the soil during establishment.
Post-Construction Stabilization
Once grading is complete, exposed slopes and channels are vulnerable until vegetation takes hold. HPTRM provides immediate protection and continues to reinforce the root system long after the grass is established.
How HPTRM Installation Works With Us on West Coast Florida
01
Site Assessment and System Selection
We evaluate the slope gradient, channel geometry, flow velocity, and soil conditions to confirm that HPTRM is the right system and to determine the appropriate product specification for your site.
02
Subgrade Preparation and Seeding
Our crew grades the subgrade to the required profile, applies the specified seed mix, and prepares the surface for mat installation in the correct sequence to support vegetation establishment.
03
Mat Installation, Anchoring, and Inspection
We install the HPTRM panels with correct overlap, install anchors at the specified spacing, terminate the edges properly, and inspect the finished installation before leaving the site.
FREQUENTLY ASKED QUESTIONS
What is the difference between HPTRM and a standard erosion control blanket?
Standard erosion control blankets are temporary products designed to protect soil until vegetation establishes, after which they degrade. HPTRM is a permanent system that continues to reinforce the root structure of the vegetation long after establishment, providing ongoing protection under hydraulic conditions that would overwhelm temporary matting.
What flow velocities can HPTRM handle?
HPTRM systems are engineered to handle significantly higher flow velocities than turf alone or temporary matting. The exact velocity rating depends on the specific product and installation. We can help you match the right system to your hydraulic design requirements.
Does HPTRM require vegetation to work?
HPTRM provides immediate erosion protection upon installation, but its long-term performance is enhanced significantly when vegetation establishes within the mat structure. We coordinate seeding as part of the installation process to support this.
Do you work from engineer-supplied specifications?
Yes. We install HPTRM in accordance with project drawings and specifications and coordinate with engineers and project managers throughout the process to ensure compliance with design and permit requirements.
How do I get a quote for HPTRM installation?
Call us at (863) 623-8452 or fill out the contact form on this page. We will follow up quickly and provide a free, no-obligation quote based on your site conditions or project drawings.
Looking for an HPTRM Contractor Near You?
If you are based in Tampa, Brooksville, Spring Hill, New Port Richey, Sarasota, Bradenton, Venice, Port Charlotte, Fort Myers, Cape Coral, or Naples, we are ready to come out and assess your site.
We have installed HPTRM on drainage channels, highway embankments, and development sites the length of West Coast Florida. We know the permit requirements, the design standards, and the site conditions that are specific to this region and we install accordingly.
Call us at (863) 623-8452 and let us know what you are working with.
REGIONAL PRESENCE
SERVICE AREAS
Strategically positioned to serve all major ports and coastal municipalities along the Florida West Coast.
- TAMPA
- BROOKSVILLE
- BRADENTON
- CAPE CORAL
- ST. PETERSBURG
- SPRING HILL
- PORT CHARLOTTE
- NAPLES
- CLEARWATER
- SARASOTA
- PORT MYERS